Houston Locksmith: A Short Guide To Choosing The Right Lock Is Key To Warehouse Security
When it comes to warehouse security, many people believe only security guards and cameras are involved. These security measures are indeed important, but the value of locks in regards to the security process is equally important. Warehouse locks are a form of passive security, which means the item or location is protected without needing the assistance of a person. To be effective, warehouse locks just need to be installed properly. Locks, cameras and security guards are a great combination, but only locks will be securing the location in question when no security guard is present or monitoring the cameras. Each situation is different, however, so getting the right lock for your needs is vital to ensuring your warehouse security needs are met.
Below will discuss various types of warehouse locks.
Perimeter gates are often the first line of security, and securing these gates is often done using padlocks. The quality of padlocked needed will depend on the value of the item you’re trying to protect. However, it is important to remember that no matter how strong your padlock is, they still must be attached to an equally strong chain or clasp. Otherwise, your lock will be useless, as the criminal will simply break the weaker item that the lock is attached to. Therefore, it is important that you use a combination of items of equal or greater strength so that there are no weak links in this aspect of your security for criminals to take advantage of. Padlocks are typically limited to perimeter security areas and are unlikely to be used beyond these areas.
2. Door Handles
Interior doors are typically secured by locking door handles and/or doorknobs. Any door handles using warehouse locks should also be equipped with a deadbolt. Door handle locks are limited in their security effectiveness because of how they lock cylinders mechanism is designed. A typical door handle lock has a lock cylinder inside that triggers a spring-loaded latch. This latch is easily triggered by using an item like a credit card or a similar device. Most criminals will spend their time trying to depress the spring loaded latch, and are less likely to waste time on door handle hardware and lock cylinders. To see how this works, go to a door in your warehouse with a lock and lock it while keeping the door ajar. Then press down on the metal latch. Pay attention to how the latch depresses as you press down on it, even though the door is locked. This flaw makes it possible to depress the latch by inserting a thin item like a credit card or something similar in between the frame and door, which will then allow the person to open the door. It’s also important that your door handles are working properly. If the door handle isn’t working properly, you may believe your door is secured by other warehouse locks when in reality it isn’t.
Doors located inside a building will use a deadbolt as its main locking feature. Warehouses rely quite a bit on deadbolts for their security much like other buildings. How effective your deadbolt locks will depend on how much force they can handle before being compromised. Because most criminals will use destructive force to try and gain entry into your warehouse, making sure your deadbolts are up to the task is very important. Deadbolts should be installed on any exterior doors. It is important to make sure each door is using the right lock in addition to having enough locks on each door to secure it properly. If you care about your valuables, getting your warehouse security implemented properly is the best way to keep them safe. If you need assistance, consider hiring a Houston locksmith to help.