By Greg Jessop, Pop-A-Lock of Venice, North Port, Port Charlotte

From Venice and Nokomis down to North Port, Port Charlotte and Punta Gorda, one of the most common calls we get from GM owners is: “Can I just program a spare key myself?” Sometimes the answer is yes. More often, on newer Chevy, GMC, Buick and Cadillac models, it’s no. Here’s how to tell.

The short answer

Your GM vehicle Can you add a key yourself?
2016 or older, and you have one working key Usually yes, using the add-a-key steps in your owner’s manual
2017–2021, and you have two working keys Usually yes, using the add-a-key steps
Turn-key ignition with only one working key, or none Usually yes, with GM’s 30-minute relearn, but it erases every other key (see below)
2017–2021 push-to-start with only one working fob Not by yourself. It needs professional key programming equipment, which we have, so we can program it on site with no trip to the dealer
2022 or newer with push-to-start Not by yourself. Most need GM’s SPS2 programming software, which we can access, so we can program it on site with no trip to the dealer

When you can do it yourself

If your GM is 2016 or older and you have a working key, GM built in a simple add-a-key procedure. You turn the working key on and off, then turn the new key on within a few seconds, and the security light tells you when it’s learned. The exact steps are in the “Keys” or “Theft Deterrent” section of your owner’s manual.

A few things trip people up:

  • The new key still has to be cut. A key from the internet arrives uncut. It has to be cut to match your ignition and door locks first.
  • Not every online key works. Many cheap keys have the wrong chip, or have already been programmed to another car and can’t be reused. You often don’t find out until after you’ve paid for cutting.
  • Timing matters. Miss the few-second window and the new key won’t take.
  • It won’t fix a lost key. Adding a key doesn’t remove the old one from the car. If a key was lost or stolen, it still starts your vehicle.

The 30-minute relearn

Most turn-key GM vehicles also have a longer built-in relearn. It works even if you have only one key, or no working key at all, as long as you have a new chip key cut to turn your ignition. It’s a legitimate GM procedure, and the steps are in your owner’s manual or GM service information. Before you try it, know the trade-offs:

  • It erases every other key. When it finishes, only the key you used will start the car. That’s a plus if a key was lost or stolen, because the missing key stops working too. Any spares then have to be added back, and on 2017 and newer models that can require professional programming equipment. We have it and can add your spares at your location.
  • It takes 30 minutes or more with the ignition on, and if it’s interrupted you start over.
  • The key has to be right. It must be cut correctly and have the correct chip, or nothing happens.
  • Turn-key only. Push-to-start models generally need professional programming equipment instead.

When you need a locksmith

Starting with most 2017 models, GM requires two working keys for the quick add-a-key method. With only one key, the quick add-a-key procedure won’t finish and the security light stays on. On turn-key models, the 30-minute relearn above is the other option, if erasing your other keys is acceptable. Most 2022 and newer push-to-start Chevy, GMC, Buick and Cadillac models, like the Silverado, Sierra, Equinox, Tahoe and Escalade, require GM’s SPS2 programming software. As a NASTF Vehicle Security Professional, we have access to SPS2, so you don’t need to go to the dealer. We program these newer keys on site at your home or work.

That’s where most people get stuck, and it’s where we come in.

A recent job in Port Charlotte: 2023 GMC Yukon, all keys lost

On August 5, 2026, a Port Charlotte customer had lost every key to a 2023 GMC Yukon. Many people assume a newer GM with no keys means a tow to the dealer. It doesn’t.

We came to the customer’s location, used GM’s SPS2 software to program a new factory original fob, then generated and cut the emergency insert key, all on site. No tow and no dealer appointment.

Why call Pop-A-Lock instead of the dealer?

  • We come to you. No tow and no waiting for a service appointment. We cut and program the key at your home or work, anywhere in the Venice, North Port and Port Charlotte area.
  • We have access to GM’s SPS2. As a registered Vehicle Security Professional with the National Automotive Service Task Force (NASTF), we can use GM’s SPS2, the same programming software the dealer uses, on 2022 and newer vehicles that require it. For other GM models, we use professional key programming equipment.
  • Factory original keys. We supply and program factory original GM keys and fobs, with a 30-day warranty against defects on the factory original fobs we supply.
  • One price, quoted up front. When comparing with the dealer, ask for the full price: the key, the programming, and cutting the emergency blade are usually three separate charges, plus Florida sales tax.

What to have ready when you call: your vehicle’s year, make and model, and whether you have a working key.

Need a GM key in Venice, North Port or Port Charlotte?

Pop-A-Lock of Venice, North Port, Port Charlotte makes and programs GM keys on site in Venice, South Venice, Nokomis, Laurel, Osprey, Vamo, North Port, Warm Mineral Springs, Englewood, Manasota Key, Rotonda West, El Jobean, Port Charlotte and Punta Gorda.

Call 941-240-5000, Monday–Friday, 8 AM–5 PM. Tell us your year, make and model, and we’ll give you an exact price over the phone.

Pop-A-Lock Venice, North Port, Port Charlotte locksmiths with service vans